Xerox 3600B User Guide - Page 30
Configuring LPR, Configuring CentreWare IS, Network, display, Up/down arrow, CentreWare IS - phaser printer
UPC - 095205742640
View all Xerox 3600B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Configuring LPR Your printer can use LPR (Line Printer Protocol) which transmit the printing data through port 510. To enable LPR, take the following steps: 1 Press Menu until Network appears on the bottom line of the display and press OK. 2 Press the Up/down arrow buttons until LPR appears and press OK. 3 Press the Up/down arrow buttons until On appears and press OK. Configuring IPP Your printer can use IPP ( Internet Printing Protocol) which transmit the printing data through port 631. To enable IPP, take the following steps: 1 Press Menu until Network appears on the bottom line of the display and press OK. 2 Press the Up/down arrow buttons until IPP appears and press OK. 3 Press the Up/down arrow buttons until On appears and press OK. Configuring SLP Your printer can use SLP (Service Location Protocol) which transmit the printing information through port 427. To enable SLP, take the following steps: 1 Press Menu until Network appears on the bottom line of the display and press OK. 2 Press the Up/down arrow buttons until SLP appears and press OK. 3 Press the Up/down arrow buttons until On appears and press OK. Configuring CentreWare IS Your printer can use CentreWare IS (Internet Services). To enable CentreWare IS, take the following steps: 1 Press Menu until Network appears on the bottom line of the display and press OK. 2 Press the Up/down arrow buttons until CentreWare IS appears and press OK. 3 Press the Up/down arrow buttons until On appears and press OK. 4.4