Xerox 3600B User Guide - Page 81
Using SetIP (Phaser 3600/N, Phaser 3600/DN only), Installing SetIP, Using SetIP
UPC - 095205742640
View all Xerox 3600B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
2 Using SetIP (Phaser 3600/N, Phaser 3600/DN only) • Installing SetIP • Using SetIP Installing SetIP 1 Make sure that the printer is connected to your computer and powered on. 2 Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and an installation window appears. If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing "X" with the letter which represents your drive and click OK. 5 Click Next. 6 Click Finish. Using SetIP 1 From the Windows Start menu, select Programs or All Programs Æ your printer driver name Æ SetIP Æ SetIP. The program automatically detects and displays new and configured print servers on your network. 3 Click Install SetIP Utility(Optional). 4 Click Next. 2 Select the name of your printer and click . If you cannot find your printer name, click to refresh the list. NOTES: • To confirm the MAC address, see the NETWORK PRINTER CARD TEST PAGE. The NETWORK PRINTER CARD TEST PAGE will be printed after the Configuration Page. • The refreshed list doesn't show your printer, click enter your network printer card's IP address, subnet mask, default gateway, and then click Apply. 3 Click OK to confirm the settings. 4 Click Exit to close the SetIP program. 11 Using SetIP (Phaser 3600/N, Phaser 3600/DN only)