Xerox 3600B User Guide - Page 21
Job Held Timer, Port Timeout - printer driver
UPC - 095205742640
View all Xerox 3600B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Item Collation Explanation Values: Off, On This item allows you to collate the received data through the print driver. The printer will print output in sets to match the sequence of the originals. • Off: When the printer receives data from the PC driver, it will print out as received. • On: When the printer receives data from PC driver, it will print out after storing and collating the data. SmartDuplexing Values: Off, On If this menu is set to On, the printer will detect a single page job and print it as a simplex-singlepage even though the printer driver on your PC was set to duplex printing as a default. Job Timeout Values: 0 ~ 1800 sec You can set the length of time the printer waits before printing the last page of a print job that does not end with a command to print the page. The default is 15 sec. When a print time-out occurs, the printer prints the page in the print buffer. Job Held Timer Values: 1 ~ 72 hours The machine holds a secure print job for a specific time period. The default is 24 hours. You can set a time period for a maximum of 72 hours. Item Maintenance Parallel Setup USB Setup Panel Lockout Explanation This item allows you to maintain your printer. • Clean Drum: Cleans the OPC drum of the cartridge and produces a cleaning sheet with toner debris on it. • Clean Fuser: Cleans the fuser unit inside of the printer and produces a cleaning sheet with toner debris on it. • Supplies Life: This item allows you to check how many pages have printed and how much toner is left in the cartridge. • Parallel Port: You can enable or disable the parallel port. • Port Timeout: You can set the length of time the printer waits before printing the last page of a print job that does not end with a command to print the page. When a print time-out occurs, the printer prints the page in the print buffer. • Parallel PDL: This item defines the printer language to communicate between computer and printer through the parallel port. You can set among Auto Select, PCL, PostScript, EPSON, IBM. • Usb Port: You can enable or disable the USB port as a security measure. • Port Timeout: You can set the length of time the printer waits before printing the last page of a print job that does not end with a command to print the page. When a print time-out occurs, the printer prints the page in the print buffer. • USB PDL: This item defines the printer language to communicate between computer and printer through the USB port. You can set among Auto Select, PCL, PostScript, EPSON, IBM. Values: Off, On You can lock or unlock. If you set this item On, you have to enter a passcode to access some of the panel. 2.6