ZyXEL VES1724-56B2 User Guide - Page 182

Chapter 17 Link Aggregation 17.4 Link Aggregation Setting Click Advanced Application > Link Aggregation > Link Aggregation Setting to display the screen shown next. See Section 17.1 on page 180 for more information on link aggregation. Figure 108 Advanced Application > Link Aggregation > Link Aggregation Setting The following table describes the labels in this screen. Table 75 Advanced Application > Link Aggregation > Link Aggregation Setting LABEL Port Selection criteria DESCRIPTION Specify the way to choose a port in the trunk group (multiple ports) to transmit/receive packets for different type of traffic. Select one of the following criteria for the port selection. Source MAC Address: Uses packets' source MAC address as the criteria. Destination MAC Address: Uses packets' destination MAC address as the criteria. Source+Destination MAC Address: Uses packets' both source and destination MAC address as the criteria. Source IP Address: Uses packets' source IP address as the criteria. This can be only used for IPv4 packets. Destination IP Address: Uses packets' destination IP address as the criteria. This can be only used for IPv4 packets. Group ID Active Port Group Source+Destination IP Address: Uses packets' both source and destination IP address as the criteria. The field identifies the link aggregation group, that is, one logical link containing multiple ports. Select this option to activate a trunk group. This field displays the port number. Select the trunk group to which a port belongs. 182 VES1724-56 User's Guide