ZyXEL VES1724-56B2 User Guide - Page 228

Chapter 24 Multicast Click Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile link to display the screen as shown. Figure 133 Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile The following table describes the labels in this screen. Table 98 Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile LABEL Profile Name Start Address End Address Add Clear Profile Name Start Address End Address Delete Cancel DESCRIPTION Enter a descriptive name for the profile for identification purposes. To configure additional rule(s) for a profile that you have already added, enter the profile name and specify a different IP multicast address range. Type the starting multicast IPv4 or IPv6 address for a range of multicast IP addresses that you want to belong to the IGMP filter profile. Type the ending multicast IPv4 or IPv6 address for a range of IP addresses that you want to belong to the IGMP filter profile. If you want to add a single multicast IP address, enter it in both the Start Address and End Address fields. Click Add to save the profile to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Click Clear to clear the fields to the factory defaults. This field displays the descriptive name of the profile. This field displays the start of the multicast address range. This field displays the end of the multicast address range. To delete the profile(s) and all the accompanying rules, select the profile(s) that you want to remove in the Delete Profile column, then click the Delete button. To delete a rule(s) from a profile, select the rule(s) that you want to remove in the Delete Rule column, then click the Delete button. Click Cancel to clear the Delete Profile/Delete Rule check boxes. 228 VES1724-56 User's Guide