ZyXEL VES1724-56B2 User Guide - Page 85

Chapter 8 Basic Setting The following table describes the labels in this screen. Table 18 Rate Limit Profile Setup LABEL Name Ingress Commit Rate(Kbps) DESCRIPTION Enter a descriptive name (up to 20 characters) for identification purposes. Select the checkbox and enter the guaranteed bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow through a port. Enter a number between 64 and 1000000. Alternatively, clear the checkbox to not use the rate limit. Ingress Peak Rate(Kbps) Note: The sum of commit rate cannot be greater than or equal to the uplink bandwidth. Select the checkbox and enter the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow through a port when burst traffic occurs. The incoming traffic over this peak rate will be discarded. Enter a number between 64 and 1000000. Alternatively, clear the checkbox to not use the rate limit. Note: The peak rate should be greater than the commit rate. Egress Rate(Kbps) Select the checkbox and enter the maximum bandwidth allowed in kilobits per second (Kbps) for the outgoing traffic flow through a port. Enter a number between 64 and 1000000. Alternatively, clear the checkbox to not use the rate limit. Add Click Add to save the new rule to the switch. Then a summary table displays in the bottom of the screen. Cancel Click Cancel to reset the fields to your previous configuration. Clear Click Clear to clear the fields to the factory defaults. Name This field displays the descriptive name for the rate limit profile. Ingress Commit This field displays the ingress committed rate limit for the port(s) Ingress Peak This field displays the ingress peak rate limit for the port(s) Egress This field displays the egress rate limit for the port(s). Applied Ports This field displays the port number(s) to which this profile is applied. Delete Cancel You can apply a rate limit profile to a port in the Port Setup screen. Check the rule(s) that you want to remove in the Delete column and then click the Delete button. Click Cancel to clear the selected checkboxes in the Delete column. 8.10.1 Per Queue Ratelimit Profile You can also use per queue rate limit profiles to define ingress and egress data rate limits for each queue on the Switch. VES1724-56 User's Guide 85