ZyXEL VES1724-56B2 User Guide - Page 188

Chapter 18 Port Authentication 18.2 Port Authentication Configuration To enable port authentication, first activate the port authentication method(s) you want to use (both on the Switch and the port(s)) then configure the RADIUS server settings in the Advanced Application > Auth setup > Radius Server Setup screen. Click Advanced Application > Port Authentication in the navigation panel to display the screen as shown. Figure 114 Advanced Application > Port Authentication 18.2.1 Activate IEEE 802.1x Security Use this screen to activate IEEE 802.1x security. In the Port Authentication screen click 802.1x to display the configuration screen as shown. Figure 115 Advanced Application > Port Authentication > 802.1x The following table describes the labels in this screen. Table 77 Advanced Application > Port Authentication > 802.1x LABEL Active DESCRIPTION Select this check box to permit 802.1x authentication on the Switch. Note: You must first enable 802.1x authentication on the Switch before configuring it on each port. Port This field displays the port number. * Settings in this row apply to all ports. Use this row only if you want to make some settings the same for all ports. Use this row first to set the common settings and then make adjustments on a port-by-port basis. Note: Changes in this row are copied to all the ports as soon as you make them. 188 VES1724-56 User's Guide