ZyXEL VES1724-56B2 User Guide - Page 92

Chapter 8 Basic Setting Click the IPv6 Neighbor Setup link in the Basic Setting > IPv6 Setup screen to display the configuration screen. Figure 49 Basic Setting > IPv6 Setup > IPv6 Neighbor Setup The following table describes the labels in this screen. Table 24 Basic Setting > IPv6 Setup > IPv6 Neighbor Setup LABEL DESCRIPTION Static Neighbor Cache Setting IPv6 Group Select whether the Switch uses the inband or the outband interface to reach the neighbor device. VID This field is available when you select Inband in the IPv6 Group field above. IPv6 Address MAC Address Add Cancel Index Interface IPv6 Address MAC Address Enter the VLAN ID (1~4094) associated with the specified IPv6 address below. Enter an IPv6 address for a static neighbor entry. Enter the MAC address for the static neighbor entry. Click Add to save the new settings to the Switch. The setting displays in the summary table at the bottom of the screen. Click Cancel to reset the fields to your previous configuration. This field displays the index number of a neighbor entry. This field displays the name of the interface the Switch uses to reach the neighboring interface. This field displays the IPv6 address of the neighboring interface. This field displays the MAC address of the neighboring interface. 92 VES1724-56 User's Guide