Aastra 6739i 6739i User Guide - Page 115
Using the Park Call/Pickup Parked Call Softkeys, Park a Call, Pickup a Parked Call
View all Aastra 6739i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Options Key 5. Select another key and In the "Type" field, select Pickup. 6. In the "Label" field, enter a label for the Pickup key. Note: The Pickup key applies in the "Idle" and "Outgoing" states only. Keep these states enabled to use the Pickup softkey. Expansion Module Keys 7. Select an expansion module key. 8. In the "Type" field, select Park. 9. In the "Label" field, enter a label for the Park key. 10. Select another key to configure for Picking up a call. 11. In the "Label" field, enter a label for the Pickup key. 12. Click Save Settings. Using the Park Call/Pickup Parked Call Softkeys Use the following procedure on the IP phones to park a call and pick up a parked call. IP Phone UI Park a Call 1. While on a live call, press the "Park" softkey. 2. Perform the following for your specific server. For Asterisk Server Server announces the extension number where the call has been parked. Once the call is parked, press the key to com- plete parking. For BroadWorks Server After you hear the greeting from the CallPark server, enter the extension where you want to park the call. For Sylantro Server Enter the extension number where you want to park the call, followed by "#" key. For ININ Server Enter the extension number where you want to park the call, followed by "#" key. 3. If the call fails, you can pick up the call (using the next procedure) and press the "Park" softkey again to retry step 2. Pickup a Parked Call 1. Pick up the handset on the phone. 2. Enter the extension number where the call was parked. 3. Press the "Pickup" softkey. If the call pick up is successful, you are connected with the parked call. 41-001317-05 REV01 - 06.2013 109