Aastra 6739i 6739i User Guide - Page 119
Speeddial/Xfer Softkey, Speeddial/Xfer Key Requirements and Functionality
View all Aastra 6739i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Options Key 6. In the "Line" field, select the line for which you want to use the key functionality. Valid values are 1 through 9. 7. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey. Expansion Module Keys 8. Select an expansion module key. 9. In the "Type" field, select BLF/Xfer. 10. In the "Label" field, enter a label for the BLF/Xfer key. 11. In the "Value" field, enter the monitored extension or the extension to transfer calls to (for example, "35"). 12. In the "Line" field, select the line for which you want to use the key functionality. Valid values are 1 through 9. 13. Click Save Settings. Speeddial/Xfer Softkey The Speed Dial key allows a number to be dialed quickly by pressing one key configured for speed dialing. The Xfer key allows a call to be transferred to other recipients blindly or consultatively. The Speeddial/Xfer key combines the Speed Dial and Xfer key's functionality together allowing the user to transfer calls or use speed dial with one key. Speeddial/Xfer Key Requirements and Functionality The Speeddial/Xfer key has the following capabilities: • Speeddial/Xfer and Speed Dial When the phone is in the "Idle" state, pressing the Speeddial/Xfer key causes the phone to go offhook and dial the predefined extension. • Speeddial/Xfer and Blind Transfer When the phone is connected to a call, pressing the Speeddial/Xfer key blind transfers the call to the predefined target. If transferring a call fails, a message "Transfer Failed" displays, and you can reconnect the call (get the call back) by pressing the line key again. • Speeddial/Xfer and Call Forward When the phone is in the "Ringing" state, pressing the Speeddial/Xfer key forwards the call to the predefined extension. Configuring a Speeddial/Xfer Softkey Use the following procedures to configure a Speeddial/Xfer softkey on your phone. IP Phone UI 1. Press on the phone to enter the Options List. 2. Press the key. By default, all of the softkeys that display are configured as "None". 3. Press a key. A softkey configuration screen displays. 4. In the "Type" field, press the key. A screen displays with softkey keys. 5. Press the function key to apply to the softkey. 6. In the "Label" field, enter a label to apply to this softkey. 7. In the "Value" field, enter the speed dial extension or the extension to transfer calls to (for example, "5551212") 8. In the "Line" field, press the or to select a line for which to apply to the softkey. Valid values are 1 through 9. 41-001317-05 REV01 - 06.2013 113