Aastra 6739i 6739i User Guide - Page 124

Options Key Aastra Web UI 1. Click on Operation->Softkeys and XML. or Click on Operation->Expansion Module. Softkeys 2. Select from "Key 1" through "Key 55". 3. In the "Type" field, select Phone Lock. Expansion Module Keys 4. Select an expansion module key. 5. In the "Type" field, select Phone Lock. 6. Click Save Settings. Using the Phone Lock Softkey After configuring a key as a lock/unlock softkey, refer to the following procedure to use the key on the phone. IP Phone UI Lock the Phone 1. Press the LOCK softkey. The phone locks. The message "Phone is Locked" displays on the screen. The LED for the softkey AND the Message Waiting Lamp illuminate steady ON. Unlock the Phone 1. Press the UNLOCK key. The "Unlock" key has a steady ON LED. A password prompt displays. 2. Enter your user password and press ENTER. Default is "22222". The phone unlocks. The LED for the key AND the Message Waiting Lamp go OFF. The message "Phone is unlocked" briefly displays on the screen. Paging Key (Sends the RTP Stream) You can configure a Paging key on the phone that allows you to send a Real Time Transport Protocol (RTP) stream to preconfigured multicast address(es) without involving SIP signalling. You enter a multicast IP address(es) and a port number for the Paging key, that when pressed, initiates an outgoing multicast RTP session. This is called Group Paging on the IP phones. You can also specify group paging RTP addresses that the phone listens for when receiving RTP streams. You can specify up to 5 listening multicast addresses in the Aastra Web UI at the path, Basic Settings->Preferences->Group Paging RTP Settings. For more information about Group Paging and how it works, and to specify multicast addresses, see "Group RTP Paging (receives RTP streams)" on page 180. 118 41-001317-05 REV01 - 06.2013