Aastra 6739i 6739i User Guide - Page 125
Configuring a Paging Key, Softkeys, Expansion Module Keys, <Softkeys>, <None>, Paging, Label
View all Aastra 6739i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Options Key Configuring a Paging Key IP Phone UI 1. Press on the phone to enter the Options List. 2. Press the key. By default, all of the softkeys that display are configured as "None". 3. Press a key. A softkey configuration screen displays. 4. In the "Type" field, press the key. A screen displays with softkey keys. 5. Press the function key to apply to the softkey. 6. In the "Label" field, enter a label to apply to this key. 7. In the "Value" field, enter a multicast IP address(es) and a port number for the Paging key. When you press this key, the phone initiates an outgoing multicast RTP session to the specified address(es) using the specified port. (For example, 239.0.1.15:10000). Notes: 1. When you select Paging for the "Type" field, the "Line" field is disabled. 2. If you enter more than one multicast address, separate the address by a comma. For example, 239.0.1.15, 245.343.2.4:10000 8. To receive RTP steams for Group Paging, you must also configure the "Paging Listen Addresses" parameter in the Web UI at the path, Basic Settings->Preferences->Group Paging RTP Settings. For more information about setting this parameter, see "Group RTP Paging (receives RTP streams)" on page 180. 9. Press to save the softkey. The softkey applies to your phone immediately and displays on your idle screen. 10.Press the to return to the previous menu or press the to return to the idle screen. Aastra Web UI 1. Click on Operation->Softkeys and XML. or Click on Operation->Expansion Module. Softkeys 2. Select from "Key 1" through "Key 55". 3. In the "Type" field, select Paging. 4. In the "Label" field, enter a label to apply to this key. 5. In the "Value" field, enter a multicast IP address(es) and a port number for the Paging key. When you press this key, the phone initiates an outgoing multicast RTP session to the specified address(es) using the specified port. (For example, 239.0.1.15:10000). Notes: 1. When you select Paging for the "Type" field, the "Line" field is disabled. 2. If you enter more than one multicast address, separate the address by a comma. For example, 239.0.1.15, 245.343.2.4:10000 6. To receive RTP steams for Group Paging, you must also configure the "Paging Listen Addresses" parameter at the path, Basic Settings->Preferences->Group Paging RTP Settings. For more information about setting this parameter, see "Group RTP Paging (receives RTP streams)" on page 180. Expansion Module Keys 7. Select an expansion module key. 8. In the "Type" field, select Paging. 9. In the "Label" field, enter a label to apply to this key. 41-001317-05 REV01 - 06.2013 119