Aastra 6739i 6739i User Guide - Page 164
Services->Call Forward, Aastra Web UI, Configuring CFWD Parameters Using the Aastra Web UI
View all Aastra 6739i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Managing Calls 2. In the "Call Forward Key Mode" field, select a call forward mode to use on the phone. Valid values are: Account, Phone, Custom. Default is Account. • Account - (default) The account mode allows you to configure CFWD on a per account basis. Pressing a configured CFWD key applies to the account in focus. • Phone - The Phone mode allows you to set the same CFWD configuration for all accounts (All, Busy, and/or No Answer). When you configure the initial account, the phone applies the configuration to all other accounts. (In the Aastra Web UI, only the account you configured is enabled. All other accounts are grayed out but set to the same configuration.) Using the Aastra Web UI, if you make changes to that initial account, the changes apply to all accounts on the phone. • Custom - The Custom mode allows you to configure CFWD for a specific account or all accounts. You can configure a specific mode (All, Busy, and/or No Answer) for each account independently or all accounts. You can set all the accounts ON or OFF. Using the IP Phone UI, you can also press the "Copy to all modes" key to copy a phone number to other phone number fields. Note: If there is only one account configured on the phone, then the mode setting is ignored and the phone behaves as if the mode was set to "Phone". 3. Click Save Settings. The changes takes affect immediately without a reboot. Configuring CFWD Parameters Using the Aastra Web UI Use the following procedure to configure the CFWD parameters using the Aastra Web UI. Note: (Optional) You can configure a Call Forward key on your phone to access the Call Forward menus if desired. If you do not configure a Call Forward key, you can still access the Call Forward menu from the IP Phone UI at the path, Services->Call Forward. Aastra Web UI 1. Click on Basic Settings->Account Configuration. The illustration above shows 2 accounts configured on the phone. Accounts must be set up by your System Administrator. 158 41-001317-05 REV01 - 06.2013