Aastra 6739i 6739i User Guide - Page 141

Making Calls Using Intercom On the 6739i, you can use the Intercom key to automatically connect with a remote extension. You must configure an Intercom softkey to use the Intercom feature. Reference To configure an Intercom Key, see "Intercom Softkey" on page 116. IP Phone UI To use the Icom Key: 1. Press the Intercom softkey. 2. Enter the extension number of the person you wish to call on the intercom or the BLF key for that extension. 3. After a beep tone, your phone automatically connects with the remote extension and you can speak through its speaker. 4. To cancel the intercom call, press . 5. When you are finished speaking, hang up the phone by placing the handset back on-hook, by pressing the Key, or by pressing the line/call appearance key for the active call. When you hang up, the remote phone also hangs up. You can set specific incoming Intercom call features on the 6739i IP phone using the Aastra Web UI. The following table describes these features. Incoming Intercom Features in Aastra Web UI Description Microphone Mute Allows you to enable or disable the microphone on the IP phone for Intercom calls made by the originating caller. Auto Answer Allows you to enable or disable the IP phone to automatically answer an Intercom call. If auto-answer is enabled on the IP phone, the phone plays a tone (if "Play Warning Tone" is enabled) to alert the user before answering the intercom call. If auto-answer is disabled, the phone treats the incoming intercom call as a normal call. Play Warning Tone Allows you to enable or disable a warning tone to play when the phone receives an incoming intercom call on an active line. Allow Barge In Allows you to enable or disable how the phone handles incoming intercom calls while the phone is on an active call. Reference For more information about the incoming Intercom features and for procedures on setting these features, see "Incoming Intercom Call Features" on page 178. 41-001317-05 REV01 - 06.2013 135