Autodesk 05726-091452-9060 User Guide - Page 36
To add a format to the list, To change an existing format's parameters
UPC - 606121590040
View all Autodesk 05726-091452-9060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
To add a format to the list 1. Click the Add button. The following dialog is displayed: 3 Basics 1. Enter a format name in Name. Choose either millimeters or inches from Units. Specify width and height in Width and Height. 2. If necessary, then specify Internal Frame - the dimensions of the image frame which is used by the 4-points Correction operation. 3. Click OK. To change an existing format's parameters 1. Choose a format from the list. Click Modify. The following dialog is displayed: 2. Change the format parameters. 3. If necessary, then specify Internal Frame - the dimensions of the image frame which is used by the 4-points Correction operation. 4. Click OK. 35
3 Basics
35
To add a format to the list
1. Click the
Add
button.
The following dialog is displayed:
1.
Enter a format name in
Name
. Choose either millimeters or inches from
Units
.
Specify width and height in
Width
and
Height
.
2.
If necessary, then specify
Internal Frame
– the dimensions of the image frame
which is used by the
4-points Correction
operation.
3.
Click OK.
To change an existing format’s parameters
1. Choose a format from the list. Click
Modify
.
The following dialog is displayed:
2.
Change the format parameters.
3.
If necessary, then specify
Internal Frame
– the dimensions of the image frame
which is used by the
4-points Correction
operation.
4.
Click
OK
.