Autodesk 05726-091452-9060 User Guide - Page 61
Deleting Calibration Pairs
UPC - 606121590040
View all Autodesk 05726-091452-9060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
WiseImage - User's Guide To modify a calibration pair 1. Select a required pair from the list in the Calibration dialog box. 2. Zoom to selected pair by button in the Calibration dialog box. 3. From the cursor menu, choose Modify or click the Calibration dialog box. The following dialog box appears: button in the Change Point dialog box 4. Type the coordinates of the real and measured points. The measured point coordinates can be picked on the screen by using the button. 5. Select the pair type in Use as. Remove the check from Use as, and the defined pair will not be used for calibration. 6. Type the name for the pair in Label. 7. Click OK. Deleting Calibration Pairs Delete the selected calibration pairs from the list in the Calibrate dialog. Note that this action can't be undone. To delete calibration pairs 1. Select the required pairs from the list in the Calibration dialog box. 2. From the cursor menu, choose Delete or click the Calibration dialog box. button in the 62