Brother International IntelliFax-1920CN Network Users Manual - English - Page 28
IP Address, Menu/Set, Stop/Exit, Subnet Mask, Enter the Subnet Mask address.
View all Brother International IntelliFax-1920CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
IP Address This field displays the current IP address of the machine. If you have selected a BOOT Method of Static, enter the IP address that you wish to assign to the machine (check with your network manager for the IP address to use). If you have selected a method other than Static, the machine will attempt to determine its IP address using the DHCP or BOOTP protocols. The default IP address of your machine will probably be incompatible with the IP address numbering scheme of your network. We recommend that you contact your network manager for an IP address for the network the unit will be connected on. 1 Press Menu/Set, 5, 1, 2. 2 Select 1 to change. Enter the IP address. 3 Press Menu/Set. 4 Press Stop/Exit. When the Boot Method is set to "Auto", the machine cannot receive IP address from a BOOTP server in Windows® 2000. So please ensure that you use DHCP for Windows® 2000 server. Subnet Mask This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to obtain the subnet mask, enter the desired subnet mask. Check with your network manager for the subnet mask to use. 1 Press Menu/Set, 5, 1, 3. 2 Enter the Subnet Mask address. 3 Press Menu/Set. 4 Press Stop/Exit. FRONT PANEL SETUP 3 - 5