Brother International IntelliFax-1920CN Network Users Manual - English - Page 40
Setup Misc., Ethernet, Menu/Set, Stop/Exit, Time Zone
View all Brother International IntelliFax-1920CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Setup Misc. Ethernet Ethernet link mode. Auto allows the print server to operate in 100BaseTX full or half duplex, or in 10BaseT half duplex mode by auto negotiation. 100BaseTX Full Duplex (100B-FD) or Half Duplex (100B-HD) and 10BaseT Full Duplex (10B-FD) or Half Duplex (10B-HD) fix the print server link mode. This change is valid after the print server has been reset (default is Auto). If you incorrectly set this value, you may not be able to communicate with your print server. 1 Press Menu/Set, 5, 6, 1. 2 Press or to select Auto/100B-FD/100B-HD/ 10B-FD/10B-HD. 3 Press Menu/Set. 4 Press Stop/Exit. Time Zone This field displays the time zone you can set for your country. The time is the difference between your location and Greenwich Mean Time. This time will be shown on documents received via the Internet. For example the Time Zone for Eastern Time in the USA and Canada is GMT-05:00. 1 Press Menu/Set, 5, 6, 2. 2 Enter the time. 3 Press or to press Menu/Set to accept the selection. 4 Press Stop/Exit to exit the configuration menu. FRONT PANEL SETUP 3 - 17