Brother International MFC490CW Users Manual - English - Page 156
Error animation, Transferring your faxes or Fax Journal report
UPC - 012502620495
View all Brother International MFC490CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Error Message Unusable Device Please Disconnect USB Device. Wrong Paper Size Cause Action A USB device or USB Flash memory drive that is not supported has been connected to the USB direct interface. Unplug the device from the USB direct interface. For more information, visit us at http://solutions.brother.com. Paper is not the correct size. Check that the machine's Paper Size setting matches the size of paper in the tray. (See Paper Size on page 25.) Error animation B Error animation displays step-by-step instructions when paper gets jammed. You can read the steps at your own pace by pressing c to see the next step and d to go backward. If you do not press a key after 1 minute the animation starts running automatically again. Note You can press d c or OK to pause the auto-animation and go back to step-bystep mode. Transferring your faxes or Fax Journal report B If the LCD shows: Unable to Clean XX Unable to Init. XX Unable to Print XX Unable to Scan XX We recommend transferring your faxes to another fax machine or to your PC. (See Transferring faxes to another fax machine on page 140 or Transferring faxes to your PC on page 141.) You can also transfer the Fax Journal report to see if there are any faxes you need to transfer. (See Transferring Fax Journal report to another fax machine on page 141.) Note If there is an error message on the machine's LCD, after the faxes have been transferred, disconnect the machine from the power source for several minutes, and then reconnect it. Transferring faxes to another fax machine B If you have not set up your Station ID, you cannot enter fax transfer mode. (See Set your station ID in the Quick Setup Guide.) a Press Stop/Exit to interrupt the error temporarily. b Press Menu. c Press a or b to choose Service. Press OK. d Press a or b to choose Data Transfer. Press OK. e Press a or b to choose Fax Transfer. Press OK. f Do one of the following: If the LCD shows No Data, there are no faxes left in the machine's memory. Press Stop/Exit. Enter the fax number to which faxes will be forwarded. g Press Black Start. 140