Brother International MFC490CW Users Manual - English - Page 163
Cleaning the outside of the machine - remove print head
UPC - 012502620495
View all Brother International MFC490CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Troubleshooting and Routine Maintenance CAUTION DO NOT take out ink cartridges if you do not need to replace them. If you do so, it may reduce the ink quantity and the machine will not know the quantity of ink left in the cartridge. DO NOT touch the cartridge insertion slots. If you do so, the ink may stain your skin. If ink gets on your skin or clothing immediately wash it off with soap or detergent. If you mix the colors by installing an ink cartridge in the wrong position, clean the print head several times after correcting the cartridge installation. Once you open an ink cartridge, install it in the machine and use it up within six months of installation. Use unopened ink cartridges by the expiration date written on the cartridge package. DO NOT dismantle or tamper with the ink cartridge, this can cause the ink to leak out of the cartridge. Cleaning the outside of the machine B B CAUTION Use neutral detergents. Cleaning with volatile liquids such as thinner or benzine will damage the outside surface of the machine. DO NOT use cleaning materials that contain ammonia. DO NOT use isopropyl alcohol to remove dirt from the control panel. It may crack the panel. Clean the outside of the machine as follows: B a Pull the paper tray (1) completely out of the machine. 1 b Wipe the outside of the machine with a soft cloth to remove dust. c Remove anything that is stuck inside the paper tray. 147