Campbell Scientific CSAT3B CSAT3B Three-Dimensional Sonic Anemometer - Page 12
Quickstart
View all Campbell Scientific CSAT3B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
CSAT3B Three-Dimensional Sonic Anemometer The CSAT3B ships with: • CM250 leveling mounting kit • USB data cable, pn 30179 • Resource DVD • Certificate of conformance 4. Quickstart This Quickstart section covers only the very basic steps in setting up a CSAT3B using SDM or CPI communications with a Campbell Scientific datalogger. It is intended primarily as an overview and general reference for setup of a CSAT3B, and is not intended as a replacement for the more detailed information on installation found in Section 7, Installation. 4.1 Hardware Connections 1. Mount a 3.33 cm (1.31 in) outer diameter pipe or crossarm (such as a CM20X) to a tripod mast or tower as shown in FIGURE 4-1. FIGURE 4-1. Mounting a CM20X crossarm with crossarm-to-pole bracket 2. Mount the CM250 leveling mount to the end of the crossarm as shown in FIGURE 4-2. 3. Use the captive bolt on the CM250 to mount the CSAT3B (FIGURE 4-2). The orientation of the CSAT3B should be level and pointing in the direction of the prevailing wind. 2