Campbell Scientific CSAT3B CSAT3B Three-Dimensional Sonic Anemometer - Page 29

Communications, Power Requirements

Get Campbell Scientific CSAT3B PDF manuals and user guides View all Campbell Scientific CSAT3B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

CSAT3B Three-Dimensional Sonic Anemometer Internal Monitor Measurements Update Rate: Inclinometer Accuracy: Relative Humidity Accuracy: Board Temperature Accuracy: 2 Hz ± 1 ° ± 3% over 10 − 90% range ± 7% over 0 − 10% range ± 7% over 90 − 100% range ± 2 °C 6.2 Communications SDM: Used for datalogger-based data acquisition. Bit Period: Cable Length: Address Range: Bus Clocks per Sample: 10 µs to 1 ms 7.6 m (25 ft) max @ 10 µs bit period 76 m (250 ft) max @ 1 ms bit period 1 - 14 ~200 CPI: Used for datalogger-based data acquisition. Baud Rate: Cable Lengthi: Address Range: Bus Clocks per Sample: 50 kbps to 1 Mbps 15 m (50 ft) max @ 1 Mbps 122 m (400 ft) max @ 250 kbps 853 m (2800 ft) max @ 50 kbps 1 - 120 ~300 RS-485: Used for anemometer configuration or PC-based data acquisition. Baud Rate: Cable Length: Bus Clocks per Sample: 9.6 kbps to 115.2 kbps 305 m (1000 ft) max @ 115.2 kbps 610 m (2000 ft) max @ 9.6 kbps ~500 (ASCII formatted) USB: Used for anemometer configuration or PC-based data acquisition. Connection Speed: Cable Length: USB 2.0 full speed 12 Mbps 5 m max 6.3 Power Requirements Voltage Requirement: 9.5 - 32 Vdc Current Requirement (10 Hz Measurement Rate) Current @ 12 Vdc: 110 mA Current @ 24 Vdc: 65 mA Current Requirement (100 Hz Measurement Rate) Current @ 12 Vdc: 145 mA Current @ 24 Vdc: 80 mA i For additional details, refer to CSI whitepaper "Designing Physical Network Layouts for the CPI Bus" 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
CSAT3B Three-Dimensional Sonic Anemometer
Internal Monitor Measurements
Update Rate:
2 Hz
Inclinometer Accuracy:
± 1 °
Relative Humidity Accuracy:
± 3% over 10
−
90% range
± 7% over 0
−
10% range
± 7% over 90
−
100% range
Board Temperature Accuracy:
± 2 °C
6.2
Communications
SDM:
Used for datalogger-based data acquisition.
Bit Period:
10
µ
s to 1 ms
Cable Length:
7.6 m (25 ft) max @ 10
µ
s bit period
76 m (250 ft) max @ 1 ms bit period
Address Range:
1 – 14
Bus Clocks per Sample:
~200
CPI:
Used for datalogger-based data acquisition.
Baud Rate:
50 kbps to 1 Mbps
Cable Length
i
:
15 m (50 ft) max @ 1 Mbps
122 m (400 ft) max @ 250 kbps
853 m (2800 ft) max @ 50 kbps
Address Range:
1 – 120
Bus Clocks per Sample:
~300
RS-485:
Used for anemometer configuration or PC-based data acquisition.
Baud Rate:
9.6 kbps to 115.2 kbps
Cable Length:
305 m (1000 ft) max @ 115.2 kbps
610 m (2000 ft) max @ 9.6 kbps
Bus Clocks per Sample:
~500 (ASCII formatted)
USB:
Used for anemometer configuration or PC-based data acquisition.
Connection Speed:
USB 2.0 full speed 12 Mbps
Cable Length:
5 m max
6.3
Power Requirements
Voltage Requirement:
9.5 – 32 Vdc
Current Requirement (10 Hz Measurement Rate)
Current @ 12 Vdc:
110 mA
Current @ 24 Vdc:
65 mA
Current Requirement (100 Hz Measurement Rate)
Current @ 12 Vdc:
145
mA
Current @ 24 Vdc:
80 mA
i
For additional details, refer to CSI whitepaper “Designing Physical Network Layouts for the CPI
Bus”
19