Campbell Scientific CSAT3B CSAT3B Three-Dimensional Sonic Anemometer - Page 15
SDM Communications, TABLE 4-1., Wiring Diagram for CSAT3B with SDM, Communications, Datalogger
View all Campbell Scientific CSAT3B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
CSAT3B Three-Dimensional Sonic Anemometer FIGURE 4-5. Cable connections for CPI 2. Connect power and communication cable(s) to datalogger. SDM Communications If using SDM communications, connect the wire leads on the end of the CSAT3BCBL1-L cable to the datalogger SDM and power ports according to TABLE 4-1. Refer to FIGURE 4-6 which shows these connections to a CR1000 datalogger. TABLE 4-1. Wiring Diagram for CSAT3B with SDM Communications Datalogger Terminal 12 V (or other 9.5 to 32 Vdc source) Ground Ground SDM C1 SDM C2 SDM C3 Ground Wire Color Red Black Brown White Yellow Blue Clear 5
CSAT3B Three-Dimensional Sonic Anemometer
FIGURE 4-5.
Cable connections for CPI
2.
Connect power and communication cable(s) to datalogger.
SDM Communications
If using SDM communications, connect the wire leads on the end of the
CSAT3BCBL1-L cable to the datalogger SDM and power ports according
to TABLE 4-1.
Refer to FIGURE 4-6 which shows these connections to a
CR1000 datalogger.
TABLE 4-1.
Wiring Diagram for CSAT3B with SDM
Communications
Datalogger Terminal
Wire Color
12 V (or other 9.5 to 32 Vdc source)
Red
Ground
Black
Ground
Brown
SDM C1
White
SDM C2
Yellow
SDM C3
Blue
Ground
Clear
5