Campbell Scientific CSAT3B CSAT3B Three-Dimensional Sonic Anemometer - Page 16
CSAT3B Three-Dimensional Sonic Anemometer, SDM and power wiring to a CR1000 datalogger
View all Campbell Scientific CSAT3B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
CSAT3B Three-Dimensional Sonic Anemometer FIGURE 4-6. SDM and power wiring to a CR1000 datalogger CPI Communications With CPI communications, connect the red and black wires on the end of the CSAT3BCBL2-L-PT to the 12 V and ground terminals of a datalogger or to a 9.5 to 32 Vdc power supply. Connect the RJ-45 connector on the end of the CSAT3BCBL3-L-RJ to the CPI port on the CPI-compatible datalogger. Use FIGURE 4-7 as a reference. 6
CSAT3B Three-Dimensional Sonic Anemometer
FIGURE 4-6.
SDM and power wiring to a CR1000 datalogger
CPI Communications
With CPI communications, connect the red and black wires on the end of
the CSAT3BCBL2-L-PT to the 12 V and ground terminals of a datalogger
or to a 9.5 to 32 Vdc power supply.
Connect the RJ-45 connector on the
end of the CSAT3BCBL3-L-RJ to the CPI port on the CPI-compatible
datalogger.
Use FIGURE 4-7 as a reference.
6