Campbell Scientific CSAT3B CSAT3B Three-Dimensional Sonic Anemometer - Page 38
Additional Fast-response Sensors
View all Campbell Scientific CSAT3B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
CSAT3B Three-Dimensional Sonic Anemometer The inclinometer is sampled at a rate of 2 Hz and is not necessarily synchronized with the wind and sonic temperature data outputs. For applications that require correction for a moving measurement platform (on a buoy or ship, for example), a separate fast-response inclinometer, gyrometer, and accelerometer sensor should be used and sampled at the same rate as the CSAT3B wind measurements. The outputs of the CSAT3B integrated inclinometer can be viewed by connecting the USB data cable (pn 30179) to the CSAT3B and a PC computer running Campbell Scientific's Device Configuration Utility. It can also be output using the CRBasic instruction CSAT3BMonitor. See Section 8.4.1.2, CSAT3BMonitor(), for more information about setting this instruction. FIGURE 7-5. CSAT3B shown with coordinate system, with arrows representing positive x, y, and z axes 7.5 Additional Fast-response Sensors 7.5.1 Fine-Wire Thermocouple A fine-wire thermocouple (model FW05 with a FWC-L cable, TC cover, and TC cover backplate) can be mounted to the side of the anemometer block to measure temperature fluctuations. 28