Canon EOS-1D X EOS-1D Instructions - Page 151
Clean the CCD sensor., After cleaning the CCD sensor.
View all Canon EOS-1D X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
MENU Cleaning the CCD Sensor 5 •Clean the CCD sensor. Use a rubber blower to carefully blow away any dust, etc., adhering to the CCD sensor. 6 •After cleaning the CCD sensor. Set the < > switch to < >. s The camera will turn off and the shutter will close. The reflex mirror will also go down. • Set the < > switch to < >. You can start taking pictures again. Maintenance • Be sure not to turn off the camera while cleaning the CCD sensor. If the power is 9 turned off, the shutter will close and you might damage the shutter curtain with the blower. Do not use a blower brush. The brush can scratch the CCD sensor. •• Do not insert the blower tip inside the camera beyond the lens mount. If the power goes out, the shutter curtain will close and the blower tip may damage it. • Do not use a high-pressure blower or compressed, canned air. The air's extra pressure may damage the CCD sensor or the gas in the can may freeze the CCD sensor surface. 151