Canon EOS-1D X EOS-1D Instructions - Page 95
AEB with the ISO Speed
View all Canon EOS-1D X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Auto Exposure Bracketing Standard Decreased Increased exposure exposure exposure 3 Take the pictures. s The AEB sequence will be standard exposure, decreased exposure, and increased exposure. s The viewfinder's exposure level indicator will indicate the respective bracketing amount as each shot is taken. s The current drive mode will be used. (→p.99) • In the continuous shooting mode, holding down the shutter button will take all three bracketed shots continuously. The shooting will then stop automatically. • When AEB is used with the self-timer, the three bracketed shots will be taken in succession after the 2- or 10-second self-timer delay. AEB with the ISO Speed In any shooting mode etc.), you can use a fixed shutter speed and aperture and change the ISO speed automatically for AEB. 1 Press the < > button and < button simultaneously. > 5 s The ISO speed can now be set. • Set the ISO speed that is to be the standard AEB exposure. (→p.49) For example, if you want AEB with ISO 200, 400, and 800, set the ISO speed to 400. AEB amount AEB range 2 Turn the < > dial to set the desired AEB amount. s On the top LCD panel, the AEB amount will be indicated in stops and the AEB range < > will be displayed. The illustration on the left shows an AEB amount of +/-1 stop centering on the standard exposure level. • After setting the AEB amount, let go of the < > button and < > button. s The AEB range will be displayed on the top LCD panel. Exposure Control 95