Canon EOS-1D X EOS-1D Instructions - Page 26
Mounting and Detaching a Lens - body only
View all Canon EOS-1D X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Mounting and Detaching a Lens Mounting a Lens Lens mount index 1 •Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrow. 2 •Attach the lens. Align the red dots on the lens and camera and turn the lens as shown by the arrow until it snaps in place. 3 On the lens, set the focus mode switch to < >. • If the focus mode switch is set to < > (or < > on older lenses), autofocus will not operate. 4 Remove the front lens cap. Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. • Turn the lens until the red dot is at the top, then detach the lens. • Since the EOS-1D's image size is smaller than the normal 35mm film format (see illustration), the EF lens attached to the camera will have a slight telephoto effect equivalent to 1.3 times the lens focal length. AF stands for autofocus. • MF or M stands for manual focus. •• Be careful not to lose the lens caps and body cap. EOS-1D's image size (28.7 x 19.1 mm) 35mm image size (36 x 24 mm) 26