Canon EOS-1D X EOS-1D Instructions - Page 22
Recharging the Battery
View all Canon EOS-1D X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Recharging the Battery First, recharge the battery. For details on the battery, refer to the instructions for the Ni-MH Pack NP-E3. •• For details on how to recharge and discharge the battery, refer to the instructions for the Ni-MH Charger NC-E2. Connect the power cord. Connect the power cord to the charger. 1 •• Connect the power plug to an AC outlet. s The < POWER > lamp will light. 2 •Detach the protective cover. Attach the cover to the battery compartment cap and retain it. • Whenever the battery is out of the camera, be sure to attach the protective cover to prevent short circuit. 3 •Connect the battery. Connect the charging plug to the battery's charging terminal. • The charging plug can be connected to either terminal A or B. 4 Battery recharging starts. s When the battery is connected, recharging starts automatically and the < > lamp lights. s When the battery is completely recharged, the lamp will start blinking (twice per second). s A completely exhausted battery takes about 2 hours to fully recharge. • After recharging the battery, disconnect it and unplug the power cord from the AC outlet. 22