Canon imageRUNNER ADVANCE C5240 imageRUNNER ADVANCE C5200 Srs Basic Operation - Page 70

Loading Paper into the Paper Deck Unit-B2 (Optional) If there is no paper in the paper deck unit when you select it, or the paper deck unit runs out of paper during printing, a screen prompting you to load paper appears on the touch panel display. Follow the procedure below to load paper into the paper deck unit. When handling paper, take care not to cut your hands on the edges of the paper. • The Paper Deck Unit-B2 can only accommodate paper from 14 lb bond to 60 lb cover (52 to 163 g/m2) in weight. Use the multi-purpose tray to load paper that is heavier. • If paper runs out and printing is stopped when you are printing in the Staple mode, do not remove the output sheets that are waiting to be stapled. (Printing and stapling resume after you clear the paper jam.) • Paper Deck Unit-B2 is an optional product. • Only load LTR paper into the Paper Deck Unit-B2. Paper cannot be loaded horizontally. • If a message prompting you to load paper appears during printing, the remaining prints are automatically made after you load the correct paper. If you select a different paper source, the remaining prints are made after you press [OK]. 1 Open the paper deck unit.  1. Press the open button.  2. Open the paper deck unit. The inside lifter automatically descends to the paper loading position. If the machine is in the Sleep mode (the touch panel is not displayed, and only (Energy Saver) is lit), you may be unable to open the paper deck unit. In this case, press (Energy Saver) to reactivate the machine, and then press the open button on the paper deck unit. 70