Canon imageRUNNER ADVANCE C5240 imageRUNNER ADVANCE C5200 Srs Basic Operation - Page 72

When the paper is loaded into the paper deck unit, the side facing down is the one printed on.

Get Canon imageRUNNER ADVANCE C5240 PDF manuals and user guides View all Canon imageRUNNER ADVANCE C5240 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

• Do not load the following types of paper into the paper deck unit. Doing so may cause a paper jam. • Severely curled or wrinkled paper • Thin straw paper • Transparencies • Paper which has been printed on using a thermal transfer printer (Do not print on the reverse side of this paper either.) • Paper which is curled must be straightened out before loading it into the paper deck unit. • You will not be able to make copies or print if you load paper that exceeds the loading limit mark ( is not completely pushed into the paper deck unit. • Make sure that the height of the paper stack does not exceed the loading limit mark ( ). • Always check that the paper deck unit is closed. ), or if the paper drawer • The paper deck unit holds up to 2,700 sheets of paper (20 lb bond (80 g/m2)). • Load the paper stack in stages, adding approximately 500 sheets of paper at a time. If the paper deck unit can accommodate more paper, the lifter will descend. • If there are instructions on the paper package about which side of the paper to load, follow those instructions. • When the paper is loaded into the paper deck unit, the side facing down is the one printed on. • If problems, such as poor print quality or paper jams occur, try turning the paper stack over and reloading it. • For more information on the print direction of preprinted paper (paper which has logos or patterns already printed on it), see e-Manual > Copy. • Rewrap any remaining paper in its original package, and store it in a dry place, away from direct sunlight. • If paper runs out and printing is stopped, load a new paper stack. Printing restarts after the new paper stack is loaded. 72

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
72
•
Do not load the following types of paper into the paper deck unit. Doing so may cause a paper jam.
•
Severely curled or wrinkled paper
•
Thin straw paper
•
Transparencies
•
Paper which has been printed on using a thermal transfer printer (Do not print on the reverse side of this paper either.)
•
Paper which is curled must be straightened out before loading it into the paper deck unit.
•
You will not be able to make copies or print if you load paper that exceeds the loading limit mark (
), or if the paper drawer
is not completely pushed into the paper deck unit.
•
Make sure that the height of the paper stack does not exceed the loading limit mark (
).
•
Always check that the paper deck unit is closed.
•
The paper deck unit holds up to 2,700 sheets of paper (20 lb bond (80 g/m
2
)).
•
Load the paper stack in stages, adding approximately 500 sheets of paper at a time. If the paper deck unit can accommodate
more paper, the lifter will descend.
•
If there are instructions on the paper package about which side of the paper to load, follow those instructions.
•
When the paper is loaded into the paper deck unit, the side facing down is the one printed on.
•
If problems, such as poor print quality or paper jams occur, try turning the paper stack over and reloading it.
•
For more information on the print direction of preprinted paper (paper which has logos or patterns already printed on it), see
e-Manual > Copy.
•
Rewrap any remaining paper in its original package, and store it in a dry place, away from direct sunlight.
•
If paper runs out and printing is stopped, load a new paper stack. Printing restarts after the new paper stack is loaded.