Casio WK 3500 User Guide - Page 21

Connections • WK-3500 Phones and Line Out Terminals Before connecting phones or other external equipment, be sure to first turn down the volume settings of the keyboard and the connected equipment. You can then adjust volume to the desired level after connections are complete. [Front] PHONES Terminal 1 Stereo standard plug Connecting Phones 1 Connecting phones cuts off output from the keyboard's builtin speakers, so you can play even late at night without disturbing anyone. [Rear Panel] Audio amplifier AUX IN, etc. LEFT (White) RIGHT (Red) PIN plug MIDI OUT SUSTAIN/ R L/MONO IN ASSIGNABLE JACK LINE OUT DC 12V Guitar amplifier, Standard jacks keyboard amplifier, etc. Standard plugs INPUT 1 INPUT 2 Connecting to a Musical Instrument Amplifier 3 Use commercially available cords to connect to the two jacks as shown in Figure 3. It is up to you to purchase connecting cables like the ones shown in the illustration for connection. Use the keyboard's VOLUME knob to adjust the volume level. • If your amplifier has only one input jack, connect a cord to the L/MONO jack only. NOTE • You can also connect the keyboard's MIDI terminal to a computer or sequencer. See "MIDI" on page E-89 for details. Connecting to Audio Equipment 2 Use commercially available cords to connect to the two jacks as shown in Figure 2. It is up to you to purchase connecting cables like the ones shown in the illustration for connection. Normally in this configuration, you must set the audio equipment's input selector to the setting that specifies the terminal (such as AUX IN) that the keyboard is connected to. Use the keyboard's VOLUME knob to adjust the volume level. 735A-E-021A WK3100_e_10-25.p65 19 04.3.26, 0:10 PM E-19