D-Link DSL-504T Product Manual - Page 10

Information you will need about your LAN or computer - d link manual

Get D-Link DSL-504T PDF manuals and user guides
UPC - 790069265204
View all D-Link DSL-504T manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

DSL-504T User's Manual Information you will need about your LAN or computer Ethernet NIC If your computer has an Ethernet NIC, you can connect the DSL-504T to this Ethernet port using an Ethernet cable. You can also use the Ethernet port on the DSL-504T to connect to other Ethernet devices, such as a Wireless Access Point. DHCP Client status Your DSL-504T ADSL Modem is configured, by default, to be a DHCP server. This means that it can assign an IP address, subnet mask, and a default gateway address to computers on your LAN. The default range of IP addresses the DSL- 504T will assign are from 192.168.1.2 to 192.168.1.254.Your computer (or computers) needs to be configured to Obtain an IP address automatically (that is, they need to be configured as It is recommended that your collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL connection in the future. Once you have the above information, you are ready to setup and configure your DSL-504T ADSL Router. The Modem may be reset to its factory default settings by performing a Restore settings operation within the management interface (see System Commands). If you cannot gain access to the management interface, you may opt to use the Reset button on the rear panel of the device). D-Link Systems, Inc. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
10
DSL-504T User’s Manual
D-Link Systems, Inc.
Information you will need about your LAN or computer
Ethernet NIC
If your computer has an Ethernet NIC, you can connect the
DSL-504T to this Ethernet port using an Ethernet cable. You can
also use the Ethernet port on the DSL-504T to connect to other
Ethernet devices, such as a Wireless Access Point.
DHCP Client
status
Your DSL-504T ADSL Modem is configured, by default, to be
a
DHCP server. This means that it can assign an IP address,
subnet
mask, and a default gateway address to computers
on your LAN.
The default range of IP addresses the DSL-
504T will assign are
from
192.168.1.2
to
192.168.1.254
.Your
computer (or computers)
needs to be configured to
Obtain an
IP address automatically
(that is, they need to be configured as
It is recommended that your collect and record this information here, or in some other
secure place, in case you have to re-configure your ADSL connection in the future.
Once you have the above information, you are ready to setup and configure your
DSL-504T ADSL Router.
The Modem may be reset to its factory default settings by performing a
Restore settings operation within the management interface (see
System
Commands). If you cannot gain access to the management interface, you
may opt to use the Reset button on the rear panel of the device).