D-Link DSL-504T Product Manual - Page 57
DHCP Server Settings for the LAN continued - dsl disconnect
UPC - 790069265204
View all D-Link DSL-504T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
DSL-504T User's Manual DHCP Server Settings for the LAN DHCP Server Settings for the LAN (continued) No DHCP: Disable DHCP service to manually configure IP settings for workstations. Click Apply. DHCP Server: Make this selection to use the router as a DHCP server for your LAN. DHCP Relay: Make this selection to use the DHCP service provided by your ISP. Type the DHCP Relay IP address in the space provided. Click Starting IP The lowest available IP address. The default IP address is Address: 192.168.1.2. If you change the address of the router, this address will automatically change to be the next consecutive address. Ending IP Address: The highest IP address number in the pool. Lease Time: This is the amount of time in seconds that a workstation is allowed to reserve an IP address in the pool if the workstation is disconnected from the network or powered off. The new settings must be saved and the Router must be restarted for the settings to go into effect. To Save & Reboot the Router, click on the Tools directory tab and then click the Misc menu button. In the Misc Settings menu, click the Reboot button under Force the DSL-504T to system restart. The Router will save the new settings and restart. Upon restarting the Router will automatically establish the WAN connection D-Link Systems, Inc. 57