Dell 2330d User's Guide (HTML) - Page 29
Universal Setup, From this, You can, Factory default setting, Mode Main Menu
UPC - 884116003618
View all Dell 2330d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Universal Setup From this You can: menu: Units of Measure Specify the height, width, and feed direction of the Universal Paper Size. Inches* (US) Millimeters* (non-US) Portrait Width Set the portrait width of the universal media. 3-48 inches 76-1219 mm NOTE: If the width exceeds the maximum, the printer uses the maximum width allowed. NOTE: 12 inches is the US factory default setting. Inches can be increased in 0.01-inch increments. NOTE: 305 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Portrait Height Set the portrait height of the universal media. 3-48 inches 76-1219 mm NOTE: If the height exceeds the maximum, the printer uses the maximum height allowed. NOTE: 19 inches is the US factory default setting. Inches can be increased in 0.01-inch increments. NOTE: 483 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Feed Direction Specify the feed direction of the Universal Paper Size. Short Edge* Long Edge NOTE: Feed Direction only appears if the longest edge of the media is shorter than the Maximum Physical Width of the printer. *Factory default setting Reports Mode Reports Mode Main Menu Menu Settings Page Device Statistics Network Setup Page Profiles List Print Fonts Print Directory