Dell 2330d User's Guide (HTML) - Page 83

Loading Paper Setting the Paper Size and Paper Type Loading the 250-Sheet and 550-Sheet Paper Trays Using the Rear Exit Using the Multipurpose Feeder Linking and Unlinking Trays Setting the Paper Size and Paper Type NOTE: You must install the software for your printer before configuring the paper trays. For more information, see Setting up for Local Printing or Setting up for Network Printing. Dell™ 2330d Laser Printer - Attached Locally to a Computer After you set the Paper Size and Paper Type to the correct settings for the size and type used in the trays, then any trays containing the same size and type are automatically linked by the printer. NOTE: If the size of the paper being loaded now is the same size as the previously loaded paper, do not change the Paper Size setting. 1. Ensure that the printer is on and Ready appears. 2. From the operator panel, press the Menu button until Paper Menu appears. 3. Press the Select button . 4. Press the Arrow buttons until Size/Type appears, and then press the Select button . Select Source appears. 5. Press the Arrow buttons until the correct source appears, and then press the Select button . Size appears under the source name. 6. Press the Select button . 7. Press the Arrow buttons until the correct size appears, and then press the Select button . Submitting Changes appears, followed by Size. 8. Press the Arrow buttons until Type appears, and then press the Select button . 9. Press the Arrow buttons until the correct type appears, and then press the Select button . Submitting Changes appears, followed by Type.