Dell Latitude XFR D630 Service Manual - Page 66
Removing the Display Top Cover, Installing the Display Top Cover
View all Dell Latitude XFR D630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
DellTM XFR D630 Fully Rugged Notebook Service Manual Location of left and right display grommets 6. Install hinge on each side, on top of display panel brackets. Secure each hinge to top cover with 3 M2.5 X 5-mm screws. NOTE: Hinges are labeled R (right) and L (left) and must be installed on the correct side. 7. Install the bezel (see Installing the Display Bezel). 125H 8. Install the display assembly (see Installing the Display Assembly). 126H NOTE: Ensure the display cable grommets are properly installed by following the instructions provided at the beginning of Installing the Display Assembly. 127H 10.7 Removing the Display Top Cover CAUTION: Before working inside your computer, follow the safety instructions in the XFR D630 Product Information Guide and in the XFR D630 User's Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). 1. Follow the instructions in Before You Begin. 128H 2. Remove the display assembly (see Removing the Display Assembly). 129H NOTE: Ensure the display cable grommets were removed by following the grommet removal instructions provided in Removing the Display Assembly at step 13. 130H 3. Remove the display bezel (see Removing the Display Bezel). 13H 4. Remove the display panel (see Removing the Display Panel). 132H 10.8 Installing the Display Top Cover NOTE: If replacing the display top cover, remove the replacement display top cover from its packaging. The new part will have a mylar covering. The antenna cable will be taped to the inside of the cover. Carefully remove the tape from the antenna cable. Page 66 of 106 Revision A01