Dell Latitude XFR D630  Service Manual - Page 92

Speaker

Get Dell Latitude XFR D630 PDF manuals and user guides View all Dell Latitude XFR D630 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 92 highlights

DellTM XFR D630 Fully Rugged Notebook Service Manual NOTICE: If you are servicing the system board, RF Passthru board or bottom chassis, continue with next steps to remove the PC Card interface board. 10. Remove the screw and then disconnect the interface board connector from the system board. Remove the PC Card interface board. 19.2 Installing the PC Card Cage NOTICE: If you removed the PC Card Reader only, skip to step 2. If you also removed the PC Card interface board, start with step 1. 1. Install the PC Card interface. Connect the PC Card interface board to the system board and secure with the screw to the bottom chassis. 2. Install the PC Card cage. Connect the PC Card Reader cable to the interface board. Install the four M2x3-mm screws. 3. Replace the palm rest (see Installing the Palm Rest). 230H NOTE: Ensure that you reconnect the coin-cell battery (see Coin-Cell Battery) before you replace 231H the keyboard. 4. Replace the display assembly (see Installing the Display Assembly). 23H 5. Replace the keyboard (see Keyboards). 23H 6. Replace the media bay device (see XBay Devices). 234H 7. Replace the hinge cover (see Installing the Hinge Cover). 235H 8. Replace the battery. 20 Speaker CAUTION: Before working inside your computer, follow the safety instructions in the XFR D630 Product Information Guide and in the XFR D630 User's Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). 20.1 Removing the Speaker 1. Follow the instructions in Before You Begin. 236H 2. Remove the hinge cover (see Removing the Hinge Cover). 237H 3. Remove any installed media bay device (see XBay Devices). 238H 4. Remove the keyboard (see Keyboards). 239H 5. Remove the display assembly (see Removing the Display Assembly). 240H Page 92 of 106 Revision A01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
Dell
TM
XFR D630 Fully Rugged Notebook Service Manual
Page 92 of 106
Revision A01
NOTICE:
If you are servicing the system board, RF Passthru board or bottom chassis, continue
with next steps to remove the PC Card interface board.
10.
Remove the screw and then disconnect the interface board connector from the system board.
Remove the PC Card interface board.
19.2
Installing the PC Card Cage
NOTICE:
If you removed the PC Card Reader only, skip to
step 2
.
If you also removed the PC
Card interface board, start with
step 1
.
1.
Install the PC Card interface.
Connect the PC Card interface board to the system board and
secure with the screw to the bottom chassis.
2.
Install the PC Card cage. Connect the PC Card Reader cable to the interface board.
Install the
four M2x3-mm screws.
3.
Replace the palm rest (see
Installing the Palm Rest
).
NOTE:
Ensure that you reconnect the coin-cell battery (see
Coin-Cell Battery
) before you replace
the keyboard.
4.
Replace the display assembly (see
Installing the Display Assembly
).
5.
Replace the keyboard (see
Keyboards
).
6.
Replace the media bay device (see
XBay Devices
).
7.
Replace the hinge cover (see
Installing the Hinge Cover
).
8.
Replace the battery.
20
Speaker
CAUTION: Before working inside your computer, follow the safety instructions in the
XFR D630 Product Information Guide and in the
XFR D630 User’s Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the
computer).
20.1
Removing the Speaker
1.
Follow the instructions in
Before You Begin
.
2.
Remove the hinge cover (see
Removing the Hinge Cover
).
3.
Remove any installed media bay device (see
XBay Devices
).
4.
Remove the keyboard (see
Keyboards
).
5.
Remove the display assembly (see
Removing the Display Assembly
).