Dell Latitude XFR D630 Service Manual - Page 94
Installing the Fan
View all Dell Latitude XFR D630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
DellTM XFR D630 Fully Rugged Notebook Service Manual 1. Follow the instructions in Before You Begin. 248H 2. Remove the hinge cover (see Removing the Hinge Cover). 249H 3. Remove any installed media bay device (see XBay Devices). 250H 4. Remove the keyboard (see Keyboards). 251H 5. Remove the display assembly (see Removing the Display Assembly). 25H 6. Remove the palm rest (see Removing the Palm Rest). 253H 7. Remove the processor thermal-cooling assembly (see Removing the Processor Thermal254H Cooling Assembly). 8. Remove the 3 M3 x 4-mm screws that secure the fan to the base. 4 3 2 1 1 Fan connector 2 Fan cable 3 Fan cable grommet 4 Fan 9. Disconnect the fan cable from the system board and remove the fan. 21.2 Installing the Fan 1. Install the fan and attach to the base using the 3 M3 x 4-mm screws. 2. Attach the fan cable to the system board. Then attach the grommet on the fan cable to the cage enclosure. 3. Replace the processor thermal-cooling assembly (see Installing the Processor Thermal-Cooling 25H Assembly). 4. Replace the palm rest (see Installing the Palm Rest). 256H NOTE: Ensure that you reconnect the coin-cell battery (see Coin-Cell Battery) before you replace 257H the keyboard. Page 94 of 106 Revision A01