Dell Latitude XFR D630 Service Manual - Page 98
Installing the System Board
View all Dell Latitude XFR D630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
DellTM XFR D630 Fully Rugged Notebook Service Manual 22.2 Installing the System Board NOTE: If a new system board is installed, the kit includes a new system board and separate new IO dash board, with instructions. 1. If you are installing a new system board, follow these instructions: a. Remove the 2 M2 x 3-mm screws on the bottom of the original system board to separate the system board from the IO dash board. b. Use the 2 M2 x 3-mm screws just removed to secure the new IO dash board to the new system board. c. On the original system board, remove the 3 gaskets from the power port, rear USB port and side USB port. Page 98 of 106 Revision A01
Dell
TM
XFR D630 Fully Rugged Notebook Service Manual
Page 98 of 106
Revision A01
22.2
Installing the System Board
NOTE:
If a new system board is installed, the kit includes a new system board and separate new
IO dash board, with instructions.
1.
If you are installing a new system board, follow these instructions:
a.
Remove the 2 M2 x 3-mm screws on the bottom of the original system board to
separate the system board from the IO dash board.
b.
Use the 2 M2 x 3-mm screws just removed to secure the new IO dash board to the
new system board.
c.
On the original system board, remove the 3 gaskets from the power port, rear USB
port and side USB port.