Dell P703w User Guide - Page 31

Maintenance

Page 31 highlights

Back to Contents Page Maintenance Dell™ Photo P703w All-In-One Printer User's Guide Cleaning the Scanner Glass Cleaning the Scanner Lid Formatting a Memory Card Printing a Diagnostic Sheet Checking Ink Levels Replacing Ink Cartridges Running a Calibration Cleaning the Printhead Replacing the Printhead Disabling the Upgrade Upgrading the Firmware Dell™ ink cartridges are available through Dell. You can order more ink online at www.dell.com/supplies or by phone. It is recommended that you use Dell ink cartridges for your printer. Dell does not provide warranty coverage for problems caused by using accessories, parts, or components not supplied by Dell. Cleaning the Scanner Glass 1. Turn off the printer and unplug it from the wall outlet. 2. Lift the scanner lid. 3. Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass cleaner. NOTICE: Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass, since they can damage it. Do not place or spray liquid directly on the glass. The liquid might seep under the glass and damage the device. 4. Dry the glass with a lint free cloth. Cleaning the Scanner Lid 1. Turn off the printer and unplug it from the wall outlet. 2. Lift the scanner lid. 3. Clean the lid underside with a soft cloth or sponge slightly moistened with a mild soap and warm water. 4. Wipe the underside gently to loosen the debris. 5. Dry the underside with a chamois or soft cloth. NOTICE: Do not use paper-based wipes, as these might scratch the underside. 6. If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol and wipe the underside thoroughly with a damp cloth to remove any residual alcohol. Formatting a Memory Card Formatting erases all the data on a memory card. 1. Insert a memory card into the appropriate slot. 2. Press the Menu button . 3. Press the down Arrow button to scroll to Format Memory Card.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90

Back to Contents Page
Maintenance
Dellâ„¢ Photo P703w All
-In-One Printer User's Guide
Cleaning the Scanner Glass
Cleaning the Scanner Lid
Formatting a Memory Card
Printing a Diagnostic Sheet
Checking Ink Levels
Replacing Ink Cartridges
Running a Calibration
Cleaning the Printhead
Replacing the Printhead
Disabling the Upgrade
Upgrading the Firmware
Dellâ„¢ ink cartridges are available through Dell. You can order more ink online at
www.dell.com/supplies
or by phone.
It is recommended that you use Dell ink cartridges for your printer. Dell does not provide warranty coverage for problems caused by using accessories, parts,
or components not supplied by Dell.
Cleaning the Scanner Glass
1.
Turn off the printer and unplug it from the wall outlet.
2.
Lift the scanner lid.
3.
Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass cleaner.
4.
Dry the glass with a lint free cloth.
Cleaning the Scanner Lid
1.
Turn off the printer and unplug it from the wall outlet.
2.
Lift the scanner lid.
3.
Clean the lid underside with a soft cloth or sponge slightly moistened with a mild soap and warm water.
4.
Wipe the underside gently to loosen the debris.
5.
Dry the underside with a chamois or soft cloth.
6.
If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol and wipe the underside thoroughly with a damp cloth to
remove any residual alcohol.
Formatting a Memory Card
Formatting erases all the data on a memory card.
1.
Insert a memory card into the appropriate slot.
2.
Press the
Menu
button
.
3.
Press the down
Arrow
button
to scroll to Format Memory Card.
NOTICE:
Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass, since they can damage it. Do not place or spray liquid directly
on the glass. The liquid might seep under the glass and damage the device.
NOTICE:
Do not use paper-based wipes, as these might scratch the underside.