Dell PowerEdge C6420 EMC Installation and Service Manual - Page 100
Removing the riser card, Installing the riser card
![]() |
View all Dell PowerEdge C6420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
2. Follow the procedure listed in After working inside your system. Removing the riser card Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in Before working inside your system. 3. Remove the expansion card riser assembly. 4. If installed, remove the expansion card. Steps 1. Using the Phillips #2 screwdriver, remove the screws that secure the riser card to the expansion card bracket. 2. Lift the riser card away from the expansion card bracket. Figure 51. Removing the riser card Next steps 1. Install the riser card. Installing the riser card Prerequisites 1. Follow the safety guidelines listed in Safety instructions. Steps 1. Place the riser card into the expansion card bracket. 2. Using the Phillips #2 screwdriver, tighten the screws that secure the riser card to the expansion card bracket. 100 Installing and removing enclosure components
![](/manual_guide/products/dell-poweredge-c6420-emc-installation-service-manual-276e056/100.png)