Dell PowerEdge C6420 EMC Installation and Service Manual - Page 115
Installing the OCP card
![]() |
View all Dell PowerEdge C6420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Figure 69. Removing the OCP card Next steps 1. Install the OCP card. Installing the OCP card Prerequisites 1. Follow the safety guidelines listed in Safety instructions. Steps 1. Insert the Open Compute Project (OCP) card into the sled, aligning the connector on the card with the connector in the system board. 2. You must also align the holes on the card with the guide pins on the blue retention clips. 3. Push down to lock the card in place. Installing and removing enclosure components 115
![](/manual_guide/products/dell-poweredge-c6420-emc-installation-service-manual-276e056/115.png)
Figure 69. Removing the OCP card
Next steps
1.
Install the OCP card
.
Installing the OCP card
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
Steps
1.
Insert the Open Compute Project (OCP) card into the sled, aligning the connector on the card with the connector in the system
board.
2.
You must also align the holes on the card with the guide pins on the blue retention clips.
3.
Push down to lock the card in place.
Installing and removing enclosure components
115