Dell PowerEdge C6420 EMC Installation and Service Manual - Page 43
Processor Settings, Viewing Processor Settings, Processor Settings details
View all Dell PowerEdge C6420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Option Description NOTE: The Dell Fault Resilient Mode option establishes an area of memory that is fault resilient. This mode can be used by an operating system that supports the feature to load critical applications or enables the operating system kernel to maximize system availability. Current State of Specifies the current state of the memory operating mode. Memory Operating Mode Node Interleaving Specifies if Non-Uniform Memory Architecture (NUMA) is supported. If this field is set to Enabled, memory interleaving is supported if a symmetric memory configuration is installed. If this field is set to Disabled, the system supports NUMA (asymmetric) memory configurations. This option is set to Disabled by default. ADDDC Setting Enables or disables ADDDC Setting feature. This field enables you to set the ADDDC Setting to either X8 or Enabled. This option is set to Enabled by default. Opportunistic Self-Refresh Enables or disables opportunistic self-refresh feature. This option is set to Disabled by default and is not supported when DCPMMs are in the system. Processor Settings You can use the Processor Settings screen to view the processor settings and perform specific functions such as enabling virtualization technology, hardware prefetcher, logical processor idling. Viewing Processor Settings To view the Processor Settings screen, perform the following steps: Steps 1. Power on, or restart your system. 2. Press F2 immediately after you see the following message: F2 = System Setup NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart your system and try again. 3. On the System Setup Main Menu screen, click System BIOS. 4. On the System BIOS screen, click Processor Settings. Processor Settings details About this task The Processor Settings screen details are explained as follows: Option Description Logical Processor Enables or disables the logical processors and displays the number of logical processors. If this option is set to Enabled, the BIOS displays all the logical processors. If this option is set to Disabled, the BIOS displays only one logical processor per core. This option is set to Enabled by default. Virtualization Technology Adjacent Cache Line Prefetch Hardware Prefetcher Enables or disables the virtualization technology for the processor. This option is set to Enabled by default. Optimizes the system for applications that need high utilization of sequential memory access. This option is set to Enabled by default. You can disable this option for applications that need high utilization of random memory access. Enables or disables the hardware prefetcher. This option is set to Enabled by default. Pre-operating system management applications 43