Dell PowerEdge C6420 EMC Installation and Service Manual - Page 108
Next steps, Prerequisites, Steps, Removing the M.2 SATA card from the M.2 SATA x16 riser
View all Dell PowerEdge C6420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Figure 61. Removing the M.2 SATA card from the M.2 SATA x16 riser Figure 62. Removing the M.2 SATA card from the x8 mezzanine card Next steps Install the M.2 SATA card. Installing the M.2 SATA card Prerequisites 1. Follow the safety guidelines listed in Safety instructions. Steps 1. Insert the edge connector of the M.2 SATA card into the connector on the board, and push the card in. 2. Using the Phillips #1 screwdriver, secure the card in place. 108 Installing and removing enclosure components
Figure 61. Removing the M.2 SATA card from the M.2 SATA x16 riser
Figure 62. Removing the M.2 SATA card from the x8 mezzanine card
Next steps
Install the M.2 SATA card
.
Installing the M.2 SATA card
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
Steps
1.
Insert the edge connector of the M.2 SATA card into the connector on the board, and push the card in.
2.
Using the Phillips #1 screwdriver, secure the card in place.
108
Installing and removing enclosure components