Dell PowerEdge C6420 EMC Installation and Service Manual - Page 68

Air shroud, Removing the air shroud

Get Dell PowerEdge C6420 PDF manuals and user guides View all Dell PowerEdge C6420 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

Figure 19. Installing the PERC battery Next steps 1. If disconnected, connect the battery cable to the PERC card. 2. Follow the procedure listed in After working inside your system. Air shroud Removing the air shroud Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in Before working inside your system. 3. If applicable, disconnect the battery cable from the PERC card. Steps 1. Press the clip on the air shroud to release the shroud from the sled. 2. Remove the shroud by rotating the shroud and releasing the hinge from the slot on the system. 68 Installing and removing enclosure components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
Figure 19. Installing the PERC battery
Next steps
1.
If disconnected, connect the battery cable to the PERC card.
2.
Follow the procedure listed in
After working inside your system
.
Air shroud
Removing the air shroud
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
3.
If applicable, disconnect the battery cable from the PERC card.
Steps
1.
Press the clip on the air shroud to release the shroud from the sled.
2.
Remove the shroud by rotating the shroud and releasing the hinge from the slot on the system.
68
Installing and removing enclosure components