Dell PowerEdge C6420 EMC Installation and Service Manual - Page 104
Installing the M.2 SATA card
View all Dell PowerEdge C6420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Figure 55. Removing the M.2 SATA card from the M.2 SATA x16 riser Figure 56. Removing the M.2 SATA card from the x8 mezzanine card Next steps 1. Install the M.2 SATA card . Installing the M.2 SATA card Prerequisites 1. Follow the safety guidelines listed in Safety instructions. Steps 1. Insert the edge connector of the M.2 SATA card into the connector on the board, and push the card in. 2. Using the Phillips #1 screwdriver, secure the card in place. 104 Installing and removing enclosure components
Figure 55. Removing the M.2 SATA card from the M.2 SATA x16 riser
Figure 56. Removing the M.2 SATA card from the x8 mezzanine card
Next steps
1.
Install the M.2 SATA card
.
Installing the M.2 SATA card
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
Steps
1.
Insert the edge connector of the M.2 SATA card into the connector on the board, and push the card in.
2.
Using the Phillips #1 screwdriver, secure the card in place.
104
Installing and removing enclosure components