Dell PowerEdge C6420 EMC Installation and Service Manual - Page 85
Installing the processor bracket
View all Dell PowerEdge C6420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Figure 33. Installing the processor bracket 4. If you are using an existing heat sink, remove the thermal grease from the heat sink by using a clean lint-free cloth. CAUTION: Applying too much thermal grease can result in excess grease coming in contact with and contaminating the processor socket. 5. Use the thermal grease syringe included with your processor kit to apply the grease in a quadrilateral design on the top of the processor. NOTE: The thermal grease syringe is intended for single use only. Dispose the syringe after you use it. Figure 34. Applying thermal grease on top of the processor Installing and removing enclosure components 85
Figure 33. Installing the processor bracket
4.
If you are using an existing heat sink, remove the thermal grease from the heat sink by using a clean lint-free cloth.
CAUTION:
Applying too much thermal grease can result in excess grease coming in contact with and contaminating
the processor socket.
5.
Use the thermal grease syringe included with your processor kit to apply the grease in a quadrilateral design on the top of the
processor.
NOTE:
The thermal grease syringe is intended for single use only. Dispose the syringe after you use it.
Figure 34. Applying thermal grease on top of the processor
Installing and removing enclosure components
85