Dell PowerEdge C6420 EMC Installation and Service Manual - Page 61
Installing and removing enclosure components, Safety instructions, Before working inside your system
View all Dell PowerEdge C6420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
6 Installing and removing enclosure components Topics: • Safety instructions • Before working inside your system • After working inside your system • Recommended tools • Dell EMC PowerEdge C6420 sled • PERC battery • Air shroud • System memory • Support bracket • Linking board and PCIe cable • Processor and heat sink module • Expansion cards • M.2 SSD module • Mezzanine and OCP cards • System battery • System board • Trusted Platform Module Safety instructions NOTE: Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by yourself. WARNING: Opening or removing the system cover while the system is powered on may expose you to a risk of electric shock. CAUTION: Do not operate the system without the cover for a duration exceeding five minutes. Operating the system without the system cover can result in component damage. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product. NOTE: It is recommended that you always use an antistatic mat and antistatic strap while working on components inside the system. CAUTION: To ensure proper operation and cooling, all bays in the system and system fans must be always populated with a component or a blank. Before working inside your system Prerequisites Follow the safety guidelines listed in Safety instructions. Steps 1. Power off the system, including all attached peripherals. Installing and removing enclosure components 61