Dell PowerEdge C6420 EMC Installation and Service Manual - Page 102
Installing the M.2 SATA x16 riser
![]() |
View all Dell PowerEdge C6420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Figure 53. Removing the M.2 SATA x16 riser Next steps 1. Install the M.2 SATA x16 riser. Installing the M.2 SATA x16 riser Prerequisites 1. Follow the safety guidelines listed in Safety instructions. Steps 1. Connect the data cable to the riser. 2. Insert the keyed end of the M.2 SATA riser into the lock on the system board. 3. Align and insert the edge connector into the connector on the system board. 4. Using the Phillips #2 screwdriver, tighten the screw to secure the riser to the sled. 102 Installing and removing enclosure components
![](/manual_guide/products/dell-poweredge-c6420-emc-installation-service-manual-276e056/102.png)
Figure 53. Removing the M.2 SATA x16 riser
Next steps
1.
Install the M.2 SATA x16 riser
.
Installing the M.2 SATA x16 riser
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
Steps
1.
Connect the data cable to the riser.
2.
Insert the keyed end of the M.2 SATA riser into the lock on the system board.
3.
Align and insert the edge connector into the connector on the system board.
4.
Using the Phillips #2 screwdriver, tighten the screw to secure the riser to the sled.
102
Installing and removing enclosure components